| Technical Characteristics | SDA Smart Dosing |
|---|---|
| Precision Rate | 1% Tolerance (Max.) 1,5% Tolerance (for a CPK = 1,67) |
| Speed Lines | 150…300mm/s |
| Flow Rate (*) | Min. 6g/min – Max. 400g/min (* Depending on the pump 1cc, 2cc, 4cc) |
| Time response for bead sequences | Min. 0,9s for ±8 g/m change Min. 0,3s for ±1,6 g/m change |
| Applicator Pressure | 80 bar (1305-1160 psi) |
| Equipment Feeding Pressure | 30 bar (392-580 psi) |
| Max. Module Pneumatic Pressure | 6 bar; dry, clean, unlubricated |
| Applicator Temperature Control | (Pt100, Ni120) |
| Applicator Operating Temperature | Up to 200 ºC (392 º F) (see adhesive supplier recommendations) |
| Environmental Conditions | Ambient Temperature: 0… 40ºC Relative Humidity: 90% HR max. (at 30ºC) |
| Supply Voltage | 230 VAC, 50/60 Hz (from the melter unit) |
| Applicator Mass (approx.) | 4,5kg |
